Technical Specification
Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 16MB
Antenna
Four (4) Internal 5 dBi Omni-Directional Antennas
Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) – PoE capable
1 x Reset Button
1 x Power Connector
Power Requirements
Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Technical SpecificationOperation Modes Access Point
Multiple BSSID Supports up to 8 BSSIDs per radio
LAN IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Spanning Tree Supports 802.1d Spanning Tree Protocol
Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
QoS WMM (Wireless Multimedia)
Wireless Management Features (with Neutron Series Switch)
• Access Point Auto Discovery and Provisioning
• Access Point Auto IP Assignment
• Access Point Cluster Management
• Remote Access Point Rebooting
• Access Point Device Name Editing
• Access Point Radio Settings
• Band Steering
• Traffic Shaping
• Fast Handover
• Seamless Roaming (requires RADIUS server)
• Access Point Client Limiting
• Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
• VLANs for Access Point- Multiple SSIDs
• Guest Network
• Access Point Status Monitoring
• Wireless Client Monitoring
• Wireless Traffic & Usage Statistics
• Visual Topology View
• Floor Plan View
• Map View
• Secure Control Messaging
• SSL Certificate
• Local MAC Address Database
• Remote MAC Address Database (RADIUS)
• Unified Configuration Import / Export
• Bulk Firmware Upgrade Capability
• Intelligent Diagnostics
Management
| Tx Power Control Adjust transmit power by dBmConfiguration Web-based configuration (http)
Firmware Upgrade Via web browser, settings are reserved after upgrade Administrator Setting Administrator Username and Password Change Reset Setting Reboot (press and hold for 2 seconds). Reset to factory default (press and hold for 10 seconds) System Monitoring Status Statistic and Event Log SNMP V1, V2c, V3 MIB MIB I, MIB II (RFC1213) and private MIB Traffic Shaping Incoming and outgoing wireless traffic shaping Auto-channel Selection Automatically selecting least congested channel Bandwidth Measurement IP range and bandwidth management Auto Reboot Reboot Access Point by minute, hour, day, or week Backup and Restore Save and restore settings through Web interface CLI Supports Command Line Interface Diagnosis IP pinging statistics Log SysLog and Local Log support LED Control On/Off AP Detection Scanning for available EnGenius APs Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC Address Filtering, Up to 50 field L2 Isolation (Access Point mode) |
QoS (Quality of Service) WMM (Wireless Multimedia)
Environmental & PhysicalTemperature Range
Operating: 0 to 50ºC (32º to 122ºF)
Operating humidity: 0 to 90º
Storage temperature: -20ºC to 60ºC (-4Fº to 140ºF)
Humidity (non-condensing) Operating: 90% or less
Certifications FCC, IC
Dimensions & WeightsEWS310AP Device
Weight: 363 g.
Diameter: 16.5cm
Height: 4.2cm
Package Contents
EWS310AP Dual Band N600 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
Reviews
There are no reviews yet.