The EWS330AP is a compact Indoor Access Point that is also incredibly powerful, providing an improved coverage area, faster connectivity & higher user capacity. Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4-GHz frequency band, the EWS330AP’s powerful quad-core processor boosts wireless performance and efficiency with up to 30% faster throughput compared with traditional access points.
- 11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
- 3af PoE Port offers easy placement where power outlets are unavailable
- Up to 30% Faster Throughput Over 11ac Wave 1 3×3 APs
- MU-MIMO Improves Performance & Increases User Device Capacities
Technical Specifications
Standards
IEEE 802.11b/g/n on 2.4 GHz IEEE 802.11a/n/ac on 5 GHz
Processor
Qualcomm® 717 MHz Quad-Core CPU 4x ARM Cortex A7
Antenna
2 x 2.4 GHz: 5 dBi 2 x 5 GHz: 5 dBi Integrated Omni-Directional Antenna
Physical Interface
1 x 10/100/1000 BASE-T, RJ-45 Gigabit Ethernet Port 1x DC Jack 1 x Reset Button
LED Indicators
1 x Power / 2.4 GHz/5GHz
Power Source
Power-over-Ethernet: 802.3af Input IEEE 802.11e Compliant Source 12VDC /1A Power Adapter (not included)
Maximum Power Consumption
9W
Surge Protection
0.5KV
Wireless & Radio Specifications
Operating Frequency
Dual-Radio Concurrent 2.4 GHz & 5 GHz
Operation Modes
Access Point Mode Mesh Mode
Frequency Radio
2.4 GHz: 2400 MHz ~ 2472 MHz 5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmit Power
Up to 26 dBm on 2.4 GHz Up to 26 dBm on 5 GHz
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2 x 2:2
SU-MIMO
2.4 GHz – Two (2) Spatial Stream SU-MIMO up to 400 Mbps to individual 2×2 VHT40 client devices (300 Mbps for HT40 802.11n client devices) 5 GHz – Two (2) Spatial Stream SU-MIMO up to 867 Mbps to individual 2×2 VHT40 client devices
MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 867 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
2.4 GHz: Max 400 5 GHz: Max 867 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15) 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11n/ac: 2×2 MIMO with 2 Streams
Channelization
802.11n Supports High Throughput (HT)—HT 20/40 MHz 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio—VHT 40 MHz (256-QAM) 802.11n/ac Packet Aggregation: AMPDU, ASPDU 802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz
Supported Modulation
802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management Features
Multiple BSSID
Supports 16 SSIDs (8 SSIDs per Band)
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging Cross-Band VLAN Pass-Through Management VLAN
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
Compliant with IEEE 802.11e Standard WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Deployment Options
Stand-Alone (Individually Managed) Managed Mode (with Neutron Series Switch/ezMaster)
Stand-Alone Management Features
Auto Channel Selection Auto Transmit Power Wireless STA (Client) Connected List Guest Network Fast Roaming (802.11k & 802.11r) Pre-Authentication (802.11i, 802.11x) PMK Caching (802.11i) RSSI Threshold Band Steering Traffic Shaping VLANs for Access Point – Multiple SSIDs Backup/Restore Settings Auto Reboot E-Mail Alert Site Survey Save Configuration as Default
Wireless Management Features (With ezMaster & Neutron Switch)
AP Auto-Discovery & Provisioning AP Auto IP Assignment AP Group Management Auto AP Rebooting AP Device Name Editing AP Radio Settings Band Steering Traffic Shaping Fast Roaming (802.11k & 802.11r) Pre-Authentication (802.11i, 802.11x) PMK Caching (802.11i) RSSI Threshold AP Client Limiting Client Fingerprinting AP VLAN Management VLANs for AP – Multiple SSIDs Secured Guest Network Access Point Status Monitoring Wireless Client Monitoring Email Alert Wireless Traffic & Usage Statistics Real-Time Throughput Monitoring Visual Topology View Floor Plan View Map View Wireless Coverage Display Secure Control Messaging (SSL Certificate) Local MAC Address Database Remote MAC Address Database (RADIUS) Unified Configuration Import/Export Bulk Firmware Upgrade Capability One-Click Update Intelligent Diagnostics Kick/Ban Clients Wi-Fi Scheduler
Control Features
Managed Mode (w/Neutron Switch/ezMaster) Distance Control (ACK Timeout) Multicast Supported Wi-Fi Scheduler Client Traffic Status RADIUS Accounting (802.1x) Power Save Mode (U-APSD Support) CLI Support HTTPS
Wireless Security
WEP Encryption 64/128/152 bit WPA/WPA2 Enterprise (WPA-EAP Using TKIP or AES) Hide SSID in Beacons MAC Address Filtering, Up to 32 MACs per SSID Wireless STA (Client) Connected List SSH Tunnel Client Isolation
Environmental & Physical
Temperature Range
Operating: 32ºF~104ºF (0 ºC~40 ºC) Storage: -22 ºF~176 ºF (-30 ºC~80 ºC)
Humidity (non-condensing)
Operating: 90% or less Storage: 90% or less
Dimensions & Weight
EWS330AP 3-Pack
Weight: 2.53 lbs Width: 5.98″ (152 mm) Length: 9.76″ (248 mm) Height: 4.6″ (117 mm)
Package Contents
3 – EWS330AP Dual-Band AC1300 Indoor Access Points 3 – T-Rail Mounting Kits 3 – Ceiling and Wall Mount Screw Kits 3 – Mounting Brackets 3 – RJ-45 Ethernet Cables 1 – Quick Installation Guide
Certifications
FCC CE
A
Reviews
There are no reviews yet.